home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
HAM Radio 3.2
/
Ham Radio Version 3.2 (Chestnut CD-ROMs)(1993).ISO
/
mods
/
tnc2doc
/
soft110.txt
next >
Wrap
Text File
|
1988-12-16
|
2KB
|
55 lines
TAPR TNC 2 Software Release Notes ............ Release 1.1.0
1) The correct sign-on message for this release of TNC 2
software is:
Tucson Amateur Packet Radio TNC 2
AX.25 Level 2 Version 2.0
Copyright (c) 1985 Systek. All rights reserved.
Release 1.1.0
Checksum $C8
cmd:
2) A new message
?not while connected
appears if you attempt to alter your callsign (MYCALL)
or change the AX.25 Level Two Version number (AX25L2V2
ON|OFF) while TNC 2 is not in the disconnected state.
3) The text messages stored in BTEXT and CTEXT may be
cleared by entering a % or & as the first letter in the
text. Fort example, to clear the beacon text, enter
BTEXT %<cr>
and the BTEXT buffer will be cleared.
4) Unlike TNC 1, the message in BTEXT (and CTEXT) are
stored in battery-backed RAM (bbRAM).
5) THINK TWICE BEFORE USING THE RESET COMMAND! Unlike TNC
1, RESET on TNC 2 changes ALL parameters to their de-
fault values!
6) TNC 2 SOFTWARE SOURCE CODE and TNC FIRMWARE
Copyright (c) 1985
Systek
All rights reserved.
Reproduction or translation of any part of this work
beyond that permitted by Sections 107 or 108 of the
1976 United States Copyright Act (or its legal succes-
sor) without the express permission of the copyright
owner is unlawful except as noted below. Requests for
permission to copy or for further information should be
addressed to:
Tucson Amateur Packet Radio
PO Box 22888
Tucson AZ 85734-2888
ATTN TNC 2 SOFTWARE